Network Stand Alone DVR
Network Stand Alone DVR
Network Stand Alone DVR
Network Stand Alone DVR
Network (JH.264)
Network (JH.264)
Network (JH.264)
Network (JH.264)
39
CHAP. 6 Network Setup
6-1. DVR Network Configuration
Please call your provider to identify what type of service they are providing you.
You will need to know following ;
Upload speed – For your own knowledge for expected frame rates
Download speed – For your own knowledge for expected frame rates
Addressing – For determining what scenario you should follow
Router On Site or Just a Modem – For determining what scenario you should follow
※
NOTE : If your provider is using PPPOE (usually DSL providers), you MUST have a IP Share
installed on site and follow
3) Dynamic IP of PPPOE (DSL)
for DVR setup and access.
※
PLEASE verify Internet access after installing any new equipment (routers, switches, modems, etc.).
PC’s TCP/IP Setting
Before configuring the DVR, please fill out the information below if applicable ;
Choose any PC on your network and determine its TCP/IP settings;
IP Address :
(ex.192.168.1.5)
Subnet Mask :
(ex. 255.255.255.0)
Default Gateway :
(ex.192.168.1.1)
CHAP. 6 Network Setup
Next pages are several network scenarios
. Please identify which scenario your current network
falls within and follow the instructions for configuring and accessing your DVR via TCP/IP.
