6
5
DC POWER SUPPLY USE
6
POWER ON/OFF
This appliance may be operated with the external power supply (DC adaptor), without a battery
installed.
5-1. Power Supply Use of PC USB PORT
•
Connect the earphone/USB jack to a USB port of a PC with USB cable.
•
When the USB communication is established, the LCD panel displays .
•
If the PLAY/PAUSE button is pressed for more than 3 seconds, it enters the operation mode and in the
standby (stop) state, and it is enabled to “play and record”.
•
If it is in the PC UCB power supply operation mode, the
fi
le upload/download feature is not operational.
•
Disconnect and then connect again, then it enters the USB communication mode, and the
fi
le upload/
download feature is operational.
5-2. Use of USB DC Power Supply ADAPTER(5V)
•
Connect the earphone/USB jack with USB DC Power Supply ADAPTER port.
After a while, the LCD panel turns into .
•
If the PLAY/PAUSE button is pressed for more than 3 seconds, it enters the operation mode and
in the standby (stop) state, and it is enabled to “play and record”.
Caution
•
When to disconnect the product from the PC, it is recommended to execute safe hardware removal utility
for the data protection of the product.
6-1. Power On
•
Press the PLAY/PAUSE button long enough (for more than 3 seconds), then the power is on.
•
Press the REC/PAUSE button long enough (for more than 3 seconds), then the power is on and the
recording is started.
6-2. Power Off
•
When in the STOP state for more than 3 minutes, the power is automatically off.
•
When in the standby mode, press the REC/PAUSE button long enough (for more than 3 seconds),
then the power is off.
