MEMMERT GmbH + Co. KG
Willi-Memmert-Straße 90-96
D-91186 Büchenbach
Germany
Phone: +49 (0)9122 925-0
Fax:
+49 (0)9122 14585
E-mail: [email protected]
Internet: www.memmert.com
Customer service:
Hotline:
+49 (0)9171 9792 911
Service fax: +49 (0)9171 9792 979
E-mail: [email protected]
© 2017 Memmert GmbH + Co. KG
7
6.
Mounting the cleanroom side jamb onto the
appliance
Before positioning the appliance
in the wall, mount the clean-
room jamb onto the appliance:
1. On the cleanroom side, align
the pre-assembled clean-
room side jamb so that it
is flush to the front of the
shutter box. (The appliance
side with the operating ele-
ments is the greyroom side.)
2. Then, mark the position of
the slot holes of the jamb on
the appliance with a water-
proof pen (Fig. 5).
3. Drill holes into the appliance
at the marked positions with
a Ø 2.5 mm drill.
4. Mount the cleanroom jamb
onto the appliance with the
M3 x 6 mm Torx screws.
If you wish, you can grout
the joints between the jamb
and the appliance with
silicone for a perfect seal
(not included in the scope of
delivery).
Fig. 5 Marking the slot holes in the jamb on the appliance
D33469 | 04/2018