21
Operation and control
5.4.2
Basic operation
In general, all settings are made according to the following pattern:
1. Activate the desired parameter (e.g.
temperature). To do so, press the cor-
responding activation key on the left
or right of the respective display. The
activated display is lined in colour, the
other displays are dimmed. The set
value is highlighted in colour.
.5°C
100
TEMP
TIMER
--
--
m
h
22
.4
TEMP
22
Set
2. By turning the turn control to the left
or right, adjust the set value (e.g. to
37.0
º
C).
3. Save the set value by pressing the con-
firmation key.
The display returns to normal and the
appliance begins adjusting to the de-
fined set value.
°C
22
.4
TEMP
°C
Set 37.0
Additional parameters can be set accordingly.
If no new values are entered or confirmed for approx. 30 seconds, the appliance
automatically restores the former values.
If you want to cancel the setting procedure, press the
activation key on the left or right of the display that you
want to exit. The appliance restores the former values.
Only the settings that you have confirmed by pressing
the confirmation key before cancelling the setting pro-
cedure are accepted.
5.4.3 Adjustment options
As described in chapter 5.4.2 , you can set the following parameters after pressing the
corresponding activation key (in any sequence):
Temperature
Adjustment range: model-dependent (see nameplate and tech-
nical data on page 13)
Heating operation is indicated by the
symbol.
Cooling is indicated by the
symbol.
You can select °C or °F as the temperature unit displayed
(see page 20).
°C
22
.4
TEMP
°C
Set 37.0
Interior lighting (only for cooled incubators IPP with light
module)
Adjustment range: 0 % (off), 100 % (on)
LIGHT
%
100
°C
22
.4
TEMP
°C
37
.0
Set
T
T
-
T
Summary of Contents for IPP 110
Page 42: ...42 Index ...
Page 43: ......
