5
SIM CARD UNLOCKING
Important Note: An Avire SIM card doesn’t have a SIM PIN code; if the SIM LED is
flashing red, please make sure that the SIM card has been inserted correctly. The SIM
PIN code for other network providers may vary and it can usually be
found on the outer plastic case of the SIM card.
OPTION 1
Disable the blocking PIN code using a conventional mobile phone. Plug the SIM into a
different mobile device and delete SIM PIN code in the device settings.
OPTION 2
You can program the PIN code of the SIM card into the DCP using an analogue phone
plugged into to the J1A or J9 connection (please see page 12 for more details).
Enter DCP configuration mode: wait for DCP voice command
Enter SIM card PIN parameter:
xxxx is the SIM PIN code given by the service provider for SIM.
Example if SIM PIN code is required: *1# xxxx#
At this point, the SIM card LED (middle LED) will stop flashing red. If it does not, make
sure the SIM is correctly inserted and you have entered the correct PIN.
OPTION 3
You can remotely enter SIM PIN code into DCP by texting:
P1234, P090 xxxx
This option can only be used if DCP is already connected
Important Note: Check ADDITIONAL INFORMATION FOR PROGRAMMING THE DCP
on page 11 for more information.
