14
OPERATION INSTRUCTIONS
CARE AND MAINTENANCE
Abrasive cleaners will damage this product.
Never use oven cleaner to clean any part of heater
Do not clean any heater part in a self-cleaning oven. The extreme heat will damage the
finish.
More frequent cleaning may be required as necessary. It is imperative that control
compartment, burners and circulating air passageways of the heater be kept clean.
Spiders and insects can create a dangerous condition that may damage heater or make
it unsafe. Keep burner area clean of all spiders, webs or insects. Clean burner holes by
using a heavy-duty pipe cleaner. Compressed air may help clear away smaller particles.
Inspect heater before each use.
Have heater inspected annually and repairs should be made by a qualified service
person
Check heater immediately if any of the following conditions exist:
a. The smell of gas in conjunction with extreme yellow tipping of burner flames
b. Heater does not reach proper temperature.
c. Heater’s glow is excessively uneven.
d. Burner makes popping noises during use.
Note:
A slight pop is normal when burner is extinguished.
Carbon deposits may create a fire hazard. Keep dome and emitter clean at all times.
Do not clean heater with combustible or corrosive cleaners. Use warm, soapy water.
This heater should be thoroughly cleaned on a regular basis.
After a period of storage and/or no use, check for leaks, burner obstructions and inspect
for any abrasion, wear, cuts to the hose.
In any case of failure of normal ignition, please use the
Lighter gun (Sold Separately) to reach the burner for
ignition through the hole on the bottom of burner diffuser.
WARNING
FOR YOUR SATETY:
If at any time you are unable to light burner and smell
gas, wait 5 minutes to allow gas to dissipate before
attempting to light heater.
WARNING
FOR YOUR SATETY:
DO NOT touch or move heater for at least 45 minutes
after use. Allow emitter and dome to cool before touching.
CAUTION:
Avoid inhaling fumes emitted from the heater’s first use.
Smoke and odor from the burning of oils used in
manufacturing will appear. Both smoke and odor will
dissipate after approximately 30 minutes. The heater
should NOT produce thick black smoke.
