12 |
P a g e
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Leak Check
NOTE
1. Make sure the gas co
ntrol knob (2#) is on the “OFF” position. Open access doors.
2. Make sure the gas cylinder is correctly and security connected to the pressure regulator, with a tight fit.
3. Turn on the gas cylinder valve(7#). Apply 50% soap and 50% water solution to the
gas hose at connections between the knob(5#) and the gas cylinder.
4. If there is a leak, you will see bubbles form. In the case of the leak, turn off the gas
supply, unscrew the connections. Reconnect the gas hose and retest. If the leak
persists, consult the customer service canter for assistance.
5. If the connection is sound, continue to the next step.
LIGHTING
1. Make sure control knob (2#) is on the “OFF” position on the control panel.
2. Open access doors. Turn on gas cylinder valve (7#) to fully opened position.
3. Push and turn the knob (2#) to “HEGH”.
4. Hold igniter (3#) to light the burner. Release the knob after 45 seconds.
If there is no fire turn the control knob to “OFF”, wait 5 minutes and repeat from
step 3 on.
6. Adjust flame to desired flame with the control knob.