MEM MDM SERIES Installation Manual And Operating Instructions Download Page 3

PAGE 3

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

READ BEFORE OPERATING 

READ BEFORE OPERATING 

1)

Read these instructions carefully.

2)

Keep these instructions.

3)

Heed all Warnings.

4)

Follow all instructions.

5) DO NOT use this apparatus near water.

6) Clean ONLY with a damp cloth.

7) DO NOT block  any  of  the  ventilation  openings.

Install in accordance with the instructions provided.

8) DO  NOT install  near  any  heat  sources  such  as

radiators, stoves, or other apparatus (including ampli-

fiers) that produce heat.

9) DO  NOT mount  amplifier  into  a  container  or  a

closed unventilated closet while operating.

10) DO NOT place any object or accessory equipment

such as Tuners, Mixers, Cassette Decks, etc. on top of

the amplifier. Obstructing or closing the cabinet venti-

lation openings may cause overheating.

11) DO NOT defeat  the  safety  purpose  of  the  polar-

ized or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The

wide blade and or the third prong is provided for your

safety. When the provided plug does not fit into your

outlet, consult a certified electrician for replacement of

the obsolete outlet.

12) Use only the attachments and accessories speci-

fied in this manual.

13) Do  not  place  this  product  on  an  unstable  cart,

stand, tripod, bracket, or table. The product may fall,

causing serious injury to a person, and serious dam-

age to the product. If a cart is used, use caution when

moving the cart/apparatus combination to avoid injury

from tip-over.

14) Unplug  this  apparatus  during  lighting  storms  or

when unused for long periods of time.

15) Refer all servicing to qualified service person-

nel only. Servicing is required when the apparatus has

been damaged in any way, such as power supply cord

or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed  to  rain  or  moisture,  does  not  operate

normally, or has been dropped.

16) DO NOT replace  fuses  unless  power  cord  is

removed from the AC wall outlet.

17) DO NOT install  accessories  unless  the  power

cord is removed from the AC wall outlet.

WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC  SHOCK,  DO  NOT  EXPOSE  THIS
APPLIANCE  TO  RAIN  OR  MOISTURE.  DAN-
GEROUS  HIGH  VOLTAGES  ARE  PRESENT
INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET.  REFER  SERVICING TO  QUALIFIED
PERSONNEL ONLY.

IMPORTANT SAFETY INSTRUCTIONS

INTEGRATED AMPLIFIERS

S3125A

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT  OPEN

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER.

NO USER-SERVICEABLE PARTS INSIDE.

CAUTION:

BEFORE OPERATING THE AMPLIFIER, BE SURE YOU FULLY UNDERSTAND ALL INSTRUCTIONS AND FEATURES

OF THE APPLIANCE.

The lightning flash with arrowhead symbol, within an equilateral tri-

angle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and mainte-

nance  (servicing)  instructions  in  the  literature  accompanying  the

appliance.

CAUTION

WARNING

MEM

MDM

MDM SERIES

Summary of Contents for MDM SERIES







Reviews: