User guide
Wireless remote control M-WRG-FBH
- 27 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L A T I O N & H E A T R E C O V E R Y
9
Operating the ventilation unit with the wireless
remote control M-WRG-FBH
9.1
Select ventilation program
►
Press any button on the wireless remote control to switch from idle mode (see section
7.1 on page 19) to the default view (see section 7.2 on page 19).
►
Press the
button to switch from the default view to the menu for selecting the
ventilation programs.
►
Use the
or
button to select the desired ventilation program. The symbol for
the currently selected ventilation program flashes.
The order of the ventilation programs is as follows:
Fig. 25: Order of the ventilation programs
►
Press the
button to confirm your selected ventilation program or wait 5 seconds
until the ventilation program is activated automatically.
9.1.1 Graphical illustration of the steps to select a ventilation program
Fig. 26 summarises the steps to select a ventilation program.
Idle mode
Any button on the
wireless remote
control
Default view
Select ventilation
program,
e.g.
button or wait
5 seconds
Fig. 26: Select ventilation program with wireless remote control (e.g. continuous operation)
