Installation manual
M-WRG-S...
- 31 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
11.10
Attaching the cover to the ventilation unit
►
Hold the cover of the ventilation unit with
both hands and tilt the top edge of the
cover towards the ventilation unit.
►
Insert the tabs of the cover into the open-
ings (item 1 in Fig. 32) on the top of the
ventilation unit.
►
Lightly press the bottom edge of the
cover against the ventilation unit until you
hear the cover snap in place.
11.11
Attaching the blind frame (optional for flush-mount installation)
The blind frame hides unattractive gaps between
the ventilation unit and the wall.
►
Push the blind frame (item 1 in Fig. 33)
over the installed ventilation unit until it
lies against the internal wall.
11.12
Starting up the ventilation unit
►
Start up the ventilation unit as described in the instructions provided with the unit.
Fig. 32: Cover pivot points
1
1
1
Fig. 33: Attaching the blind frame
1
