CONTENTS OF THE BOX
• Sensor Unit [1]
• USB - Charging cable [2]
• 2x carabiner [3]
First use
Charge the device according to the instructions
below for two hours before first use.
Charging the device
To charge the device, connect the USB-A connector
on the charging cable [2] to a USB power outlet and
connect the USB-B connector to the sensor unit [1].
Only USB power plugs with the markings shown on
figure
[4] may be used for charging.
[1]
[2]
[3]
[4]
2
Addons
A wide range of addons, such as handles and straps,
can be attached to the device using carabiner [3] to
measure force in different muscles.
Use the carabiner to attach the EasyForce to
addons. Make sure the addon can move freely after
being attached to the EasyForce.
Instruction for use - EN