6
Specifications
Warranty
OUTPUT POWER
VACUUM TUBE
2 X 8 W RMS (8 Ohm)
300Bx1, 6SN7x1, 5AR4x1
FREQUENCY RESPONSE
20Hz - 30 KHz
INPUT SENSIBILITY
800mV
SIGNAL/NOISE RATIO
≥ 88db
INPUT IMPEDANCE
4Ω, 8Ω
THD
1%
DIMENSION
W 300 x H 215 x D 380 mm.
WEIGHT
20,5 Kg.
POWER SUPPLY
220V - 240V AC
For warranty information, please contact your local MELODY distributor. Your purchase receipt is your permanent
record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes
or when corresponding with MELODY. When seeking warranty service, it is responsibility of the consumer to establish
proof and date of purchase. Your purchase receipt or invoice is adequate for such proof.
Every specification and design of the product is subject to change without prior notice
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong
with this component, check the points below. Sometimes the trouble may lie in another component. Investigate
the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest MELODY
authorized service center or your dealer to carry out repair work.
Symptom
Cause
Remedy
No power
supplied to unit
Power plug is disconnected from outlet Check that power cord and insert the plug
securely into outlet
No sound
The connection cables are connected
incorrectly to the speakers.
Check if connections between preamplifier
and the final amplifier are connected correctly.
No sound from
one speaker
Connecting cords or speaker cords
are disconnected on the side.
Verify that the cables between amplifier and
speaker are well- connected according to the
different polarity.
The position of the input selector does
not correspond to the component to be
played back.
Check if the input selector of the preamplifier
corresponds to the input source that you want
to listen.
