ES
EN
–
- Blue light: correct water level
- Red light: lack of water
following:
the water tank that indicates the
This appliance has a LED light on
–
pet.
used for cats.
outlet mode. This mode is normally
be added to have another water
If desired, the water fountain (A) can
–
After plugging in, the water pump
tray (B). This mode is used for any
will cause water to flow into the
–
Connect the charger cable (E) with
appliance.
the charger (F) and plug in the
–
Place the water tray (B) in the main
body.
–
Place the filter base together with
the filter (G) in the main body.
–
Fill with water up to approximately
1cm less than the line that surrounds
the entire interior of the water tank.
–
Put the rubber stopper in the
channel to prevent water leakage.
well placed.
Press the rubber hard so that it is
–
–
–
Cleaning
Disconnect the appliance from the
mains and allow it to cool before
undertaking any cleaning task.
After using this appliance for a long
time, the water tank must be
bacteria that could affect the
cleaned to prevent the growth of
health of your pet.
The following parts are suitable for
cleaning with detergent and water:
- Water tray
- Water fountain
- Water tank
- Main body
