Dear customer,
Thank you for choosing to purchase a Mellerware
brand product. Thanks to its technology, design
and operation and the fac t that it exceeds the
strictest quality standards, a fully satisfactory use
and long product life can be assured.
1. Parts description
1. Oil fins
2. Handle
3. Power indicator light
4. Adjustable thermostat control
5. Power/heat selection control
6. Cord storage bracket
7. Axle
8. Wing nut
9. “U” bracket
2. Safety advice and warnings!
Read these instructions carefully before switch-
ing on the appliance and keep them for future
reference. Failure to follow and observe these
instructions could lead to an accident. Clean all
the parts of the product as indicated in the clean-
ing section, before use.
2.1. Use or working environment:
2.1.1. Keep the working area clean and well lit.
Cluttered and dark areas invite accidents.
2.1.2. Use the appliance in a well ventilated area.
2.1.3. Do not place the appliance on hot
surfaces, such as cooking plates, gas burners,
ovens or similar items.
2.1.4. Keep children and bystanders away when
using this appliance.
2.1.5. Place the appliance on a horizontal, flat,
stable surface and away from other heat sources
and contact with water.
2.1.6. Keep the appliance away from flammable
material such as textiles, curtains, cardboard or
paper, etc.
2.1.7. Do not place flammable material near the
appliance.
2.1.8. Do not use the appliance in association
with a programmer, timer or other device that
automatically switches it on.
2.1.9. Do not use the appliance if the cable or
plug is damaged.
2.1.10. Ensure that the voltage indicated on the
rating label matches the mains power supply
voltage before plugging in the appliance.
2.2.11. Connect the appliance to the mains
power supply with an earth socket withstanding a
minimum of 16 amperes.
2.1.12. The appliance’s plug must fit into the
mains power supply socket properly. Do not alter
the plug.
2.1.13. If using a multi plug check ratings care-
fully as the current used by several appliances
could easily exceed the rating of the multi plug.
2.1.14. If any of the appliance casings breaks,
immediately disconnect the appliance from the
mains power supply to prevent the possibility of
an electric shock.
2.1.15. Do not use the appliance if it has fallen on
the floor or if there are visible signs of damage.
2.1.16. Do not force the power cord. Never use the
power cord to lift up, carry or unplug the appliance.
2.1.17. Do not wrap the power cord around the
appliance.
2.1.18. Do not clip or crease the power cord.
2.1.19. Do not allow the power cord to hang or
to come into contact with the hot surfaces of the
appliance.
2.1.20. Check the state of the power cord.
Damaged or tangled cables increase the risk of
electric shock.
2.1.21. The appliance is not suitable for outdoor use.
2.1.22. Power cord should be regularly examined
for signs of damage, and if the cord is damaged,
the appliance must not be used.
2.1.23. Do not touch the plug with wet hands.
2.1.24. The oil fin heater should always be kept
upright.
1
7
8
2
3
6
9
4
5
