•
and bring it to room temperature before
serving.
•
Since homemade bread has no
preservatives it tends to dry out and
become stale faster than commercially
produced bread.
•
Left-over stale bread can be cut into
cubes and used in your favourite reci-
pes to make croutons, bread pudding
or stuffing.
Care and cleaning:
•
Caution: To prevent electric shock,
make sure the appliance is unplugged
before undertaking any cleaning task.
•
Wait until the breadmaker has cooled
down.
•
IMPORTANT: Do not immerse either
the body or the lid of this appliance in
water or any liquid as this may cause
damage and/or electric shock.
•
Exterior: Wipe the lid and outer body of
the appliance with a damp cloth.
•
Interior: Use a damp cloth to wipe the
interior of the breadmaker once it has
cooled down completely.
•
Baking pan:
Clean the baking pan with warm water,
soap is not necessary. Avoid scratching
the non-stick surface. Dry it thoroughly
before placing it back into the baking
chamber. Do not wash the baking pan,
measuring cup, spoon or kneading
blades in the dishwasher. Do not soak
the baking pan for long periods of time,
as this could interfere with the move-
ment of the drive shaft. If the kneading
blade becomes stuck in the bread pan,
pour hot water over it and allow it to
soak for 30 minutes. This will enable
you to remove the kneading blade
more easily.
•
Be sure the appliance has completely
cooled and is clean before storing
away.
Do not use any of these when clean-
ing:
•
Paint thinner
•
Benzine
•
Steel wool pads
•
Polishing powder
•
Chemical dust cloth
•
Special care must be taken when clean-
ing the parts of this appliance that has
a non-stick coating.
•
To avoid damaging the non-stick coat-
ing, do not use metal utensils such as
spatulas, knives or forks in the baking
pan.
•
The non-stick coating may change col-
our after long term use, this is caused
by moisture and steam and will not
affect the performance of the appliance
or the quality of the baked product.
•
The hole in the centre of the kneading
blade should be cleaned. Then add a
drop of cooking oil and replace it on
the shaft in the baking pan. This will
prevent the blade from sticking.
•
Keep all the air vents and openings
clear of dust.
Storing the unit:
All the parts of this appliance must
be clean and dry before storing. This
includes wiping away any moisture from
the viewing window. Close the lid and do
not store anything on top of the lid.
26500_IM.indd 9
2012/11/26 02:34:17 PM
