Mellerware Hotty!, Manual

Page: 6 / 40

EN
ENGLISH EN
has been set.
- Wait until the appliance beeps,
which means that the temperature
has been reached.
- Open the grill, place the sandwich,
meat or other food on the lower coo-
king plate (D) and close the grill.
- To stop the beeping press the
power button (1). The timer will start
counting down and the colon on the
ÍĭƝŵĽ’DZƴǫĭĽĽƴȒƝħżƴ
- The menu ends when the timer dis-
play (9) is set to “0”.
IMPORTANT:
- You can change the temperature
and time of the menus whenever you
want.
- When the food is cooked, use the
handle (A) to open the lid. Remove
the food with a plastic spatula.
- A beep will sound each time a key
is pressed. Press the vegetable and
meat keys simultaneously to cancel
the key tone if desired.
- Use caution when placing food on
the grill so as not to burn yourself.
- Never use metal knives or sharp
things, as they may damage the non-
stick coating of the cooking plates.
- The temperature regulators increa-
se/decrease 5 degrees per touch. To
regulate the temperature more quic-
kly, press and hold the buttons.
- When a menu is activated, you can
increase/decrease the time and tem-
perature without any problem.
īƴqşƴƹǓƏŔƴşüƴ’ƴƝÝĽÝ´ƹÝÍƴŊÝŔǓƴŵƏÝƝƝƴ
on its corresponding symbol for 3
seconds.
ERRORS
USING THE APPLIANCE AS A
GRIDDLE
- The upper plate/top is level with
the lower plate/base. The upper and
lower plates are aligned to create a
large cooking surface.
- With one hand on the handle, use
the other hand to press the release
button 180° (C), and push the handle
back.
- Note: Remove the grease tray from
the grill thoroughly to avoid staining
the surface.
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
- Press the power button for 3 se-
´şŔÍƝƴƹşƴƹǓƏŔƴşüƴƹħÝƴĔƏĭĽĽżƴ
- Unplug the appliance from the
mains.
Programmes
Time
(min)
Temperature
(ºC)
8
Vegetables
Sausage
Fish
Chicken
Beef Steak
10
8
7
8
200
220
210
230
230
Display
Cause
Solution
Open
circuit
Short
circuit
Over-
heating
Contact
customer
service
Contact
customer
service
kǫĭƹ´ħƴşüƴ
and let it
cool down
completely
and plugit in
again