Mellerware Cuddly!, Manual

Page: 9 / 64

ES EN
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
position and mark the drilling
points on the wall.
Drill into the wall where marked and
insert the rawlplugs. (Fig.2-3).
Place the support by matching the
holes with the rawlplugs and screw
in fi rmly. (Fig.4).
Follow the indications of Fig. 5.
Make sure that the bracket is fi rmly
fi xed; it should be able to support
twice the weight of the appliance.
Instructions for use
BEFORE USE
Make sure that all products’
packaging has been removed.
Some parts of the appliance
have been lightly greased.
Consequently, the fi rst time the
appliance is used a light smoke
may be detected. After a short
time, this smoke will disappear.
To eliminate the smell given off by
the appliance when used for the
fi rst time, it is recommended to
have it on at full power for 2 hours
in a well-ventilated room.
USE
Unroll the cable completely before
plugging it in.
Connect the appliance to
the mains.
Press the button
SET CURRENT DAY/TIME
The fi rst thing to do is to confi gure
the day and time you are in.
Press the button for 3 seconds.
The display will show “d”. Press +/-
to select the day of the week (1-7):
- Monday (1)
- Tuesday (2)
- Wednesday (3)
- Thursday (4)
- Friday (5)
- Saturday (6)
- Sunday (7)
Press to confi rm the day of the
week. Then, will appear on
the screen.
Press +/- to select the hour.
Press to confi rm the time. Then,
will appear on the screen.
Press +/- to select the minutes.
Press to confi rm the minutes
and fi nish the confi guration.
NOTE: If the appliance is
unplugged, the clock and calendar
will be reset to factory defaults.
HEATING MODE
Press to select the desired
heating mode. By pressing
repeatedly, the device will change
mode in this order:
Comfort mode: press +/- to set
the temperature between 5-35˚C.
ECO mode: press +/- to set the
temperature between 1-31˚C.
P1/P2/P3: predefi ned weekly
programs.
Anti-freeze mode: the
temperature cannot be adjusted
and it is by default 7˚C.