background image

 

Dismantling Guide

 

Rev. 1.0 

 

 

 

 

 

Mellanox Technologies Confidential

 

 

 

2 of 13

 

 

 

NOTE: 

THIS INFORMATION IS PROVIDED BY MELLANOX FOR INFORMATIONAL PURPOSES ONLY 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
ARE DISCLAIMED. IN NO EVENT SHALL MELLANOX BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 
THIS HARDWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 

 

 

 

Mellanox Technologies, Inc. 

350 Oakmead Parkway Suite 100 

Sunnyvale, CA 94085 

 

U.S.A. 

www.mellanox.com

  

Tel: (408) 970-3400 

Fax: (408) 970-3403 

Mellanox Technologies Ltd 

PO Box 586 Hermon Building 

Yokneam 20692 

Israel 

Tel: +972-4-909-7200 

Fax: +972-4-959-3245 

 

 

 © Copyright 2011. Mellanox Technologies, Inc. All Rights Reserved. 

Mellanox®, BridgeX®, ConnectX®, InfiniBlast®, InfiniBridge®, InfiniHost®, InfiniRISC®, 
InfiniScale®, InfiniPCI®, PhyX® and Virtual Protocol Interconnect® are registered trademarks of 
Mellanox Technologies, Ltd. CORE-Direct and FabricIT are trademarks of Mellanox Technologies, Ltd.  

All other marks and names mentioned herein may be trademarks of their respective companies.

Contact Information

 

 
Should you have any questions regarding our Products, please feel free to contact us directly or contact our 
local distributors. 
 

Mellanox Technologies Call Center  

Tel: + 
Email: 

[email protected]

 

Summary of Contents for MIS5022Q-1BFR














Reviews: