Hardware Installation
Rev 1.0
17
Mellanox Technologies
3
Hardware Installation
3.1
System Requirements
3.1.1 Hardware
A system with adjacent dual PCIe x8 slots is required for installing the card. For dual socket
servers, this card brings additional benefits of lower latency and lower CPU utilization when one
slot is connected to one socket and the other slot is connected to the other socket. The below list
reflects such servers:
• Dell R930 / Dell R530 / Dell T630 / Dell PowerEdge R730
• Intel Server Board S2600KP
• HP DL360
• Supermicro XDRU-i+
3.2
Operating Systems/Distributions
Please refer to
Section 1.3, “Operating Systems/Distributions,” on page 14
.
3.2.1 Software Stacks
Mellanox OpenFabric software package MLNX_OFED for Linux and WinOF -2 for Windows.
See
Chapter 4,“Driver Installation” on page 28.
3.3
Safety Precautions
1. Remove any metallic objects from your hands and wrists.
2. Make sure to use only insulated tools.
3. Verify that the system is powered off and is unplugged.
4. It is strongly recommended to use an ESD strap or other antistatic devices.
3.4
Pre-installation Checklist
1. Verify that your system meets the hardware and software requirements stated above.
2. Shut down your system if active.
3. After shutting down the system, turn off power and unplug the cord.
The adapter is being installed in a system that operates with voltages that can be lethal.
Before opening the case of the system, observe the following precautions to avoid
injury and prevent damage to system components.
