Rev 1.2
8
Mellanox Technologies
Step 2.
Install MFT by running:
Step 3.
Start MFT:
Step a.
modprobe mlx_accel_tools
Step b.
mst start -with_fpga
Step c.
mst statusstatus
To burn the latest Firmware:
Step 1.
Locate the firmware bin file in FW folder:
Step 2.
Burn the firmware:
Step 3.
To load the firmware:
install.sh
apps-13:~ # mlx_accel_tools
apps-13:~ # mst start --with_fpga
apps-13:~ # mst status
MST modules:
------------
MST PCI module is not loaded
MST PCI configuration module is not loaded
MST devices:
------------
No MST devices were found nor MST modules were loaded.
You may need to run 'mst start' to load MST modules.
FPGA devices:
-------------------
/dev/mst/mt4117_pciconf0_fpga_i2c
/dev/mst/mt4117_pciconf1_fpga_rdma
a
a. It is recommended to use the RDMA device as it uses the fast path to the FPGA. I2C is used for
recovery purposes when RDMA is not functional.
mlxburn -d /dev/mst/mt4117_pciconf0 -i <fw.bin>
mlxfwreset -d /dev/mst/mt4117_pciconf0 reset -y
