Rev 2.9
Mellanox Technologies
58
Figure 31: Rack Rail Kit Parts MIS00083/85
Before you install your new MTS3600 switch, unpack the system and check to make sure that all
the parts have been sent, check this against the parts list. Check the parts for visible damages that
may have occurred during shipping.
Note: If anything is damaged or missing, contact your customer representative immediately.
Procedure
1.
Place the ESD mat on the floor where you will be working and put on the ESD strap. Make
sure the ESD strap is touching your skin and that the other end is connected to a verified
ground.
2.
Choose which side of the switch you want even with the vertical rack support. Either the side
with the power supply units or the side with the IB connectors can be even with the vertical
rack support. The other side of the switch will be further inside of the rack.
Things to consider before choosing where to mount the rails and rail slides.
Bracket
Rail slide
Rail
