Driver Installation
Rev 1.5
45
Mellanox Technologies
4.2.3.2 Unattended Installation
The following is an example of an unattended installation session.
Step 1.
Open a CMD console
->
Click Start
->
Task Manager
File
->
Run new task
->
and enter CMD.
Step 2.
Install the driver. Run:
Step 3.
[Optional] Manually configure your setup to contain the logs option:
Step 4.
[Optional] if you want to control whether to install ND provider or not
1
.
Step 5.
[Optional] If you do not wish to upgrade your firmware version
2
.
4.2.4 Installation Results
Upon installation completion, you can verify the successful addition of the network card(s)
through the Device Manager.
Upon installation completion, the inf files can be located at:
• %ProgramFiles%\Mellanox\MLNX_WinOF2\Drivers\<OS>
To see the Mellanox network adapters, display the Device Manager and pull down the “Network
adapters” menu.
If no reboot options are specified, the installer restarts the computer whenever necessary without
displaying any prompt or warning to the user.
Use the
/norestart
or
/forcerestart
standard command-line options to control reboots.
MLNX_WinOF2-1_10_<revision_version>_All_x64.exe /S /v/qn
MLNX_WinOF2-1_10_All_x64.exe /S /v/qn /v”/l*vx [LogFile]"
MLNX_WinOF2-1_10_All_x64.exe /vMT_NDPROPERTY=1
1. MT_NDPROPERTY default value is True
MLNX_WinOF2-1_10_All_x64.exe /vMT_SKIPFWUPGRD=1
2. MT_SKIPFWUPGRD default value is False
Applications that hold the driver files (such as ND applications) will be closed during the unat-
tended installation.
