ConnectX®-3 Ethernet Dual SFP+ Port Adapter Card User Manual
Rev 1.4
Mellanox Technologies
39
C.3
Installing the New Bracket
1.
Place the bracket onto the card until the screw holes line up.
Do not force the bracket onto the card. You may have to gently push the LEDs using a
small screwdriver to align the LEDs with the holes in the bracket.
2.
Screw on the bracket using the screws and washers saved from the procedure above step 1.
Figure 15: Placing the Bracket on the Card
3.
Make sure that the LEDs are aligned onto the bracket holes.
4.
Use a torque driver to apply up to 2 lbs-in torque on the screws.
