ConnectX®-3 Ethernet Dual SFP+ Port Adapter Card User Manual
Rev 1.4
Mellanox Technologies
29
2.
Compare the programmed firmware version with the latest available.
a. Go to Mellanox’s web site:
http://www.mellanox.com/supportdownloader.
b. Enter your card PSID to display the latest firmware.
Figure 9: Support Download Assistant
3.
If a newer firmware version exists for your adapter card, update the firmware as follows:
a. Download the firmware image zip file from the Download Center (see Step 2a above).
b. Unzip the firmware image.
c. Burn the firmware image. Enter:
> flint -d /dev/mst/mt4099_pci_cr0 q
Image type: ConnectX
FW Version: 2.9.4000
Device ID: 4099
Chip Revision: 0
Description: Node Port1
Port2 Sys image
GUIDs: 000002c900000200 000002c900000201
000002c900000202 000002c900000203
MACs:
000002c90200 000002c90201
Board ID: (MT_1020110019)
VSD:
PSID: MT_1020110019
