Operating Instructions: Melitta
®
Solo
®
& Perfect Milk
|
1830-0618 | 2018-08
31
Technical data
GB
Troubleshooting
Malfunction
Cause
Measure
The symbols for cleaning
and stand-by
fl ash
alternately.
The brewing unit is missing
or not properly inserted.
Insert the brewing unit properly and
lock.
The brewing chamber is
overfi lled.
Switch off the appliance and switch
it on again using the ON/OFF
button
(repeat if necessary) until
standby mode is displayed.
Continuous fl ashing of all
buttons.
System error
Switch off the appliance and switch
it on again via the ON/OFF button
; if this does not solve the
problem send the appliance to the
service department.
Technical data
Technical data
Operating voltage
220-240 V, 50/60 Hz
Power consumption
maximum 1400 W
Pump pressure
maximum 15 bar
Dimensions
Width
Depth
Height
200 mm
455 mm
325 mm
Capacity
Bean container
Water tank
125 g
1.2 l
Weight (empty)
8,1 kg
Ambient conditions
Temperature
Relative humidity
10°C to 32°C
30% to 80% (non-condensing)
You can reset the appliance to the default
settings.
Prerequisite
: The appliance must be
ready for operation.
■
To do so, press the on/off button
and
also press the steam dispensing button
for more than 2 seconds.
→
The appliance has been reset to
default settings.
Overview of default settings:
Default settings
Brewing temperature
Medium
Water hardness
Very hard
Timer for
Auto OFF function
30 minutes
Timer for energy-saving
mode
5 minutes
Reset the appliance to the default settings
