manualshive.com logo in svg

Melitta PASSIONE, Operating Instructions Manual

Share
Download
Melitta PASSIONE Operating Instructions Manual Download Page 42

Care and maintenance

90

GB

Symbol on the 

selector switch 

or buttons

Displays

Steps

8.  Insert the water tank again.

 

»

The descaling process starts.

 

»

After several minutes, the appli-
ance indicates that:

 

– the third programme stage is 

reached

 

– the rotary regulator must be 

actuated.

9.  Turn the rotary regulator clockwise 

until it stops.

 

»

The descaling process is continued.

 

»

After several minutes, the appli-
ance indicates that the drip tray 
and the coffee grounds container 
must be emptied.

10.  Empty the drip tray and the coffee 

grounds container.

11.  Insert the drip tray without the coffee 

grounds container.

 

»

The appliance indicates that:

 

– the fourth programme stage is 

reached

 

– the water tank must be filled.

12.  Place the coffee grounds container 

beneath the Cappuccinatore.

13.  Open the lid of the water tank and 

pull the water tank upwards out of the 
appliance by the handle.

14.  Empty and clean the water tank. 

Summary of Contents for PASSIONE





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands