Melitta Caffeo Passione, Operating Instructions Manual

Page: 48 / 264

Problems
48
ENGLISH
Changing the water filter
Insert a new water filter (see section Inserting the water filter on page 47).
Permanently de-registering the water filter
If you have removed an inserted water filter and want to continue operat-
ing the appliance without a water filter, de-register the water filter from the
appliance:
1. Remove the water tank.
2. Remove the water filter (see
Fig. 19).
3. Fill the water tank.
4. Press the "Service" button and also the "Large cup" direct key for longer
than 2 seconds.
» The water filter is de-registered.
» The water hardness is reset to the water hardness that the appliance
had stored prior to inserting a water filter.
5. Adjust the water hardness if necessary (see section 7.4 Setting the water
hardness on page 32 ).
9 Problems
If the actions listed below fail to rectify the problems or other problems not
listed here occur, contact our hotline (local rate).
United Kingdom: +44 (0)800/ 0288 002
Problem Cause Action
Coffee only emerges as
drips from the outlet.
Grinding fineness is
too fine.
ƒ
Set a coarser grinding fine-
ness (see section 7.7 one
page 34).
Appliance is soiled.
ƒ
Clean the brewing unit (see
section 8.2 one page 36).
ƒ
Run the cleaning pro-
gramme (see section 8.4 one
page 39).
Appliance is covered
inside with limescale.
ƒ Run the descaling pro-
gram (see section 8.5 one
page 42).
Coffee does not flow. Water tank is not filled
or is not correctly
inserted.
ƒ
Fill the water tank and ensure
it is positioned correctly (see
chapter 4.4 one page 18).
Brewing unit is
clogged.
ƒ
Clean the brewing unit (see
chapter 8.2 one page 36).