30
UK
Adjusting the speed
• Allow your finger to glide up and
down the speed selector (I) to choose
a speed setting from 1 to 10. Then
press start/stop button (G), the
blender starts and blending time is
shown on the display (H).
8. Always stop the appliance and wait
until the blade has stopped complete-
ly before removing the measuring
cup or lid from the blender jug to add
more ingredients.
Wait until the blade has stopped com-
pletely before lifting the blender jug
off the motor unit, otherwise the drive
may be damaged.
9. If the motor overheats and stops run-
ning, unplug the appliance and allow
it cool down for 30 minutes before
using it again.
CLEANING
• Always switch the appliance off at the
wall socket and unplug before clean-
ing.
• Unless clearly specified in the clean-
ing instructions below, please note
that none of the parts of this appli-
ance are dishwasher safe.
• Always clean the appliance immedi-
ately after use.
• Fill the blender jug with 800 ml of
water and a few drops of washing-up
liquid. Place the lid and measuring
cup on the blender jug and place the
jug on the motor unit.
• Press the self-cleaning function but-
ton (E) and wait until the programme
is complete. Rinse the blender jug
under running water. Dry the parts
thoroughly. Repeat if necessary.
• Any residues stuck in the blender jug
can be removed with a washing-up
brush or wooden spatula. Never use
metal utensils!
• Take care not to touch the blades at
the base of the blender jug during
cleaning!
• Clean the motor unit by wiping it with
a damp cloth. A little washing-up
liquid can be added if the appliance
is heavily soiled. Do not immerse the
motor unit of the appliance in water
and make sure no water gets into the
motor unit.
• The lid and measuring jug can be
cleaned in ordinary washing-up water.
Both parts must be completely dry
before replacing them.
• Ensure the appliance is clean and dry
before storage.
• Never use abrasive detergents or
solvents.
