20
UK
USE
1. Press the brush (1) all the way down onto
the appliance air outtake, until you hear a
click.
2. Switch on the appliance by pushing the
on/off button (3) to the required position.
Position 0: Off
Position 1: Low heat
Position 2: Full heat
Position C: Cold air
3. Dry and set hair as described below.
4. Switch off by pushing the on/off button to
the “0” position. Switch off and remove
the plug from the socket once you have
finished using the appliance.
5. Release the brush by pressing the button
(5).
6. The appliance can be hung up using the
loop (5) at the bottom of the handle.
USING THE BRUSH
•
Hair should be clean before using the
appliance. First wash your hair and then
blowdry until it is almost dry. The hair
should be slightly damp when using the
appliance. If it is wet, it may frizz or be dif-
ficult to style.
•
Do not apply wax, gel, mousse or any oth-
er hair product directly onto the brushes.
1. Brush hair with an ordinary brush or comb
while still wet.
2. Roll a lock of hair around the brush. The
larger the amount of hair treated at a time,
the looser the curls will be.
3. Switch appliance on, allow hair lock to dry
while rolled up on the brush.
4. Press the button (2), and unroll the lock of
hair from the brush. The hair will now curl.
CLEANING
When cleaning the appliance, you should pay
attention to the following:
•
Remove the plug from the mains socket,
and allow the appliance to cool down
completely before cleaning it.
•
Remove dust and dirt from the appliance’s
air intake (4) with a vacuum cleaner or soft
brush.
•
Do not submerge the appliance in water,
and do not let water enter the appliance.
•
Clean the apparatus by wiping it with a
damp cloth. A little detergent can be added
if the appliance is heavily soiled.
•
Do not use scouring pads, steel wool or
any form of strong solvents or abrasive
cleaning agents to clean the appliance, as
they can damage the external surfaces of
the appliance.
•
IMPORTANT! Allow to dry completely after
cleaning. Do not use the appliance if it is
damp.
