background image

Facile 5.1 LED

 

 

 

Thank you for choosing a Meliconi remote control. 

 

 

 

 

The  Facile  5.1  LED  remote  control  is  designed  to  command  up  to 

5

  different  devices  of  the  following  types:  TV  -  SAT 

(satellite decoder) - TER (digital terrestrial  decoder) - DVD (Dvd and Blu Ray) - PVR (Personal Video Recorder and Media 
Center) - CAB (cable TV) - ADSL (ADSL decoder) - AUX (other audio video equipments). 
Thanks to the LIGHT function the keyboard lights up, allowing convenient use of the remote control even in the dark. 
Its ergonomic shape and soft rubber body make it easy to grip and protect it from shocks and drops. 
By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons. 
It  is  also  designed  to  be  connected  to  the  PC  /  TABLET  /  SMARTPHONE  via  MELICONI  audiocable  (included  in  the 
package) in order to download the latest information to its activation. 
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it. 
 
 

 

 
 
 
 
 

 

 

The  remote  control  requires  2  new  1.5V 

AAA/LR03 

alkaline  batteries,  not  included  in  the 

package. Insert with the correct polarity as shown in figure. 
DO NOT use 

rechargeable

 batteries. 

BATTERIES  TEST:

  Press  and  hold  the   

5

    button  and  check  that  the  LED  remains  on 

continuously until the button is released. If the light is off or blinks, the inserted batteries are low, 
therefore they need replacement. 
 

 

 
 
 
 
 

 

 

WARNING:

 

As  the  remote  control  is  capable  of  controlling  5  devices,  during  setup  (and  also  during  normal  use),  you  must  select  the 
operation mode; then define which device you want to control. (TV / SAT / ecc.) 

To  select  the  operation  mode,  press  the   

 

  button  quickly  and  repeatedly  until  the  LED 

corresponding to the device you want to operate is switched on. 

SAFETY WARNINGS 

The remote control and batteries should not be exposed to excessive heat such as sunlight, fire 
or the like. 
The product 

is not a toy

. Keep out of reach of children or domestic animals. 

SELECTION OF OPERATING MODE

 

Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control 

INSERTING THE BATTERIES

 

Keep this booklet for future reference 

Summary of Contents for Facile 5.1 LED








Reviews: