Meler Cantho, Instruction Manual

Page: 63 / 66

V1019
EC DECLARATION OF CONFORMITY
The manufacturer,
Focke Meler Gluing Solutions, S.A.
Pol. Los Agustinos, c/G, nave D-43
E-31160 Orkoien, Navarra - Spain
— A Focke Group Company —
declaring that the machinery, Type: ADHESIVE MELTER
Model: CANTHO N1
Serial Number:
fulfils all the relevant provisions of the Directive 2006/42/EC on machinery,
and the object of the declaration described above is in conformity with the relevant Union harmonisation
legislation:
• Directive 2014/30/EU on the harmonisation of the laws of the Member States relating to electromagnetic
compatibility .
• Directiva 2011/65/EU and its amendments on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
In reference to the harmonised standards:
• EN ISO 12100:2010. Safety of machinery - General principles for design - Risk assessment and risk reduction.
• EN ISO 13732-1:2008. Ergonomics of the thermal environment - Methods for the assessment of human
responses to contact with surfaces - Part 1: Hot surfaces.
• EN ISO 4414:2010. Pneumatic fluid power — General rules and safety requirements for systems and their
components.
• EN ISO 13857:2008. Safety of machinery — Safety distances to prevent hazard zones being reached by upper and
lower limbs.
• EN ISO 14120:2015. Safety of machinery - Guards - General requirements for the design and construction of
fixed and movable guards.
• EN 60204-1:2006, +/A1:2009, +/AC:2010. Safety of machinery - Electrical equipment of machines - Part 1:
General requirements.
• EN 61000-6-2:2005, +/AC:2005. Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity
for industrial environments.
• EN 61000-6-4:2007, +/A1:2011. Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments.
• EN 50581:2012. Technical documentation for the assessment of electrical and electronic products with respect
to the restriction of hazardous substances.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The person authorised to compile the technical file is the manufacturer established at the above address in
this declaration.
Signed in Orkoien, to date:
Original Declaration
Javier Aranguren
Managing Director