Warranty disclaimer
M-ELEC TRANSFORMERS/DRIVERS
M-Elec provides warranty against defects of
M-Elec drivers
on the following terms and conditions.
Please refer to the M-Elec website (below) for information on the warranty period of each product.
The driver must be properly installed by a qualified electrician and in accordance with our installation
guidelines and any relevant codes and standards.
The warranty does not apply to M-Elec drivers that fail as a result of neglect, mistake, misuse,
alteration, exposure to the elements, or that is improperly installed and implemented.
This includes
but is not limited to: improper wiring, installation under improper and non-approved operating
environments such as temperature, humidity, corrosion or voltage conditions; improper installation
using components that are not approved or are not M-Elec manufactured products.
It is the responsibility of the purchaser to obtain all necessary approvals and to understand the
products intended use and all relevant instructions, recommendations and guidelines for the proper
installation and use of any M-Elec driver product and related ‘manufactured products’ used in
conjunction with same.
M-Elec is not liable for the accuracy and completeness of any statements, technical information and
recommendations in any form of product literature or instructions are not guaranteed and are not part
of this warranty and does not in any way constitute a warranty. The purchaser is solely responsible for
determining suitability of the M-Elec drivers for installation and full implementation must determine
potential applications and installations independently.
To make a claim on this warranty, you must do so within the warranty period (from place of purchase)
please read our returns policy for further information (https://melec.com.au/returns-policy/) and
deliver the driver to M-Elec (at your cost) at the address listed on website. We will assess the warranty
claim and if we grant the warranty claim, we will replace the product or refund your money, at our
election.
M-Elec is not responsible or liable for any injuries, damages, or death caused by the use, misuse or
failure of products purchased from us.
This warranty is in addition to any other rights the consumer
may have under the Australian Consumer Law.
M-ELEC LED PRODUCTS - OTHER
Please refer to the M-Elec website (melec.com.au) for information on the warranty period of each
product. Each of our LED product warranties is separate and subject to the following terms and
conditions:
M-Elec products must be properly installed by a qualified electrician and in accordance with any
relevant guidelines, codes and standards. This includes wiring and connection to proper approved
components and product working environments.
This warranty is void and does not apply to products that fail as a result of neglect, mistake
misuse, alteration, or that is improperly installed and implemented
. This includes but is not limited
to: improper wiring, installation under improper and non-approved operating environments such as
temperature, humidity, corrosion or voltage conditions; improper installation using components that are
not approved or are not M-Elec manufactured products.
It is the responsibility of the purchaser to obtain all necessary approvals and to understand the products
intended use and all relevant instructions, recommendations and guidelines for the proper installation and
use of any M-Elec products and related ‘manufactured products’ used in conjunction with same.
M-Elec is not liable for the accuracy and completeness of any statements, technical information and
recommendations in any form of product literature or instructions are not guaranteed and are not part
of this warranty and does not in any way constitute a warranty. The purchaser is solely responsible
for determining suitability of the M-Elec LED products for installation and full implementation must
determine potential applications and installations independently.
The LED product warranties do not cover LEDs that continue to light, but exhibit varying/differing forward
voltage drops, light output, or colour/wavelength.
Warranty is void if LEDs are cut in any way (outside of LED strip instructions) or damaged by neglect.
Warranty is void if products have been altered, opened/modified in any way that is outside the bounds of
normal electrical work.
Please note:
This does not include removing or hard wiring downlight drivers or the
hard wiring of a flex on an M-Elec flood light.
To make a claim on any of M-Elec’s products, you must do so within the warranty period (from place
of purchase) please read our returns policy for further information (https://melec.com.au/returns-
policy/) and deliver the product to M-Elec (at your cost) at the address listed online. M-Elec will assess
the warranty claim by conducting electrical tests, making sure the contacts still exist on the LED and
visual and microscopic inspection to make sure there is no visible physical damage. If M-Elec grants the
warranty claim, we will replace the product or refund your money, at our election.
M-Elec is not responsible or liable for any injuries, damages, or death caused by the use, misuse or
failure of products purchased from us.
This warranty is in addition to any other rights the consumer may
have under the Australian Consumer Law.
To the fullest extent permitted by law, no warranties other than those described above are given in
respect of M-Elec products. M-Elec’s liability is limited, to the fullest extent permitted by law, to the
refund or replacement of the M-Elec products. We expressly do not warrant that an M-Elec product will
last any particular length of time nor guarantee is made as to fitness to a particular application, since we
have no control of the electrical supply or circuits you are using to drive the LEDs.
M-Elec goods come with guarantees that cannot be excluded under the Australian Consumer Law.
Please read our returns policy procedure for further information on M-Elec website melec.com.au or
request it via phone 1300 222 445 from our customer care consultants.
Installation accessories and installation
Solar area lights
Remote control operation and settings cont.
7.
Constant mode 100%
This mode offers 100% brightness from dusk till dawn. Suitable for areas and
seasons with sufficient sunlight charging during the day.
8.
Constant mode 70%
This mode offers 70% brightness from dusk till dawn. Suitable for areas and
seasons with sufficient sunlight charging during the day.
9.
Constant mode 40%
This mode offers 40% brightness from dusk till dawn. Suitable for areas and
seasons with sufficient sunlight charging during the day.
10. Timer disabled
This button is used to turn off “Timer mode”. Settings default to the mode selected
prior to timer activation.
11.
Timer mode 4 hours
This mode turns the light completely off 4 hrs after dusk. For example: Press this
button at any time: if the light turns on at 7pm, it will turn off at 11pm. The mode
stays active until disabled with the “Timer disabled” button (10).
12. Timer mode 8 hours
This mode turns the light completely off 8hrs after dusk. For example: Press this
button at any time: if the light turns on at 7pm, it will turn off at 3am. The mode
stays active until disabled with the “Timer disabled” button (10).
DESIGN
|
FUNCTION
|
TRUST
www.melec.com.au
Due to our policy of continuous product improvement, we reserve the right to discontinue or update product specifications
or designs at any time without notice. Please visit www.melec.com.au for the latest information on our products.
