S1
S2
S3
RF wireless LED remote controller
Four zones/areas
Press-button Dimmer
ML-2819SDIM
Parameter
Wiring diagram
Product Size
Brief introduction of buttons
Remote
Part No.
Operation Voltage
DIMENSIONS
ø/h (mm)
Operation
Frequency
ML-2819SDIM
4.5VDC
55x120x17
434MHz
Remarks
3 AAA (1.5V) batteries
Indicator: indicate the state of
remote control
Brightness button
ON/OFF of all zones
4 zones: each zone can save
3 color or modes
25% Brightness
Save button
50% Brightness
100% Brightness
75% Brightness
55.0
17.0
120.0
Brightness wheel
Part No.
Input Voltage
Remarks
Current
ML-1009FAWi
12-36VDC
Constant voltage
4x(60-180)W
4x5A
Output
Receiver(purchased separately)
12V/24V/36V
Power Supply
Constant Voltage
Single Color LED Strip
1
2
-3
6
V
D
C
w
h
it
e
1
2
3
4
w
w
c
w
w
w
c
w
ML-1009FAWi
RF & WiFi Receiver
Operation
Learning (matching)
a. Do wiring according to connection diagram
b. Wake up the remote control by touching ON/OFF button.
c. Press learning button on receiver.
d. Touch any zone button on remote control.
e. Then touch brightness wheel.
f. Connected LED light will blink to confirm zone designation.
Choose zone number , for example, and , then touch , choose the brightness you
want, zone 1 and 3 will indicate corresponding brightness as we touched.
Brightness Up & Down Button
Long Press button
to dim down/up brightness, the dimming direction will change every time after pressing
switch. For example, the first long press is brightness up, it will be dimmed down when long press again.
Dim wheel
Product
introduction
The ML-2819SDIM remote controller has 4 different zones with quick brightness control buttons.
The remote controller can also save up to 3 modes into corresponding buttons ( S1, S2, S3) for each zone.
Quick brightness Wheel for finger control design.
5
ISO9001
：
2008
