GD-5610v1
Instructions Manual
４－２．Setting HOLD CURRENT SELECT switch
A high setting value may cause burn on the
skin due to overheating of the motor.
Do not select a high value beyond the
required.
HOLD CURRENT is set up with the 〔HOLD〕switch.
(1) Set the 〔HOLD〕switch No. to the ratio of HOLD CURRENT to
DRIVE CURRENT required.
● Ratio of HOLD CURRENT
HOLD CURRENT
DRIVE CURRENT
(Factory Setting)
● HOLD CURRENT changes relative to DRIVE CURRENT setting.
The ratio of HOLD CURRENT set the switch No. to [No.F]:100% represents
the same as the setting for DRIVE CURRENT.
● The greater the ratio of HOLD CURRENT grows, the more heat the motor
generates when is on holding-state.
E
90
Ｆ
100
C
70
D
80
A
60
B
65
25
6
7
4
3
8
9
50
55
30
35
40
45
5
×100
Switch No.
Ratio of HOLD CURRENT (％)
10
15
Ratio of HOLD CURRENT（％）＝
0
1
20
2
CAUTION
-16-
