10
Unpacking the appliance
l
Remove the appliance from the packaging.
l
Remove all packing material such as plastic film, filling material and cardboard packing.
l
Check the packagt contents.
Note:
Dust or production remainders can still be present on the appliance. We recommend cleaning the
appliance as described in chapter”Cleaning”.
Operation and instruction for use
Location
A skid-proof, even surfave is suitable as installation location.
Electrical connection
Connect the mains cable to correctly installed and earthed socket 220V-240V, 50 Hz.
Install Attachment
l
Select an attachment and attach it to the shaft at the bottom of the jug.
–Use attachment “A” for warming up a variety fo liquids.
–Use attachment “B” for frothing Milk..
l
To remove an attachment simply pull it off tha shaft.
Foaming milk
l
Attach attachment”B”
l
Fill between 100ml and 150ml cold milk into the jug.
Causion:
Observe the filling mark, the milk will otherwise foam over.
Note:
l
For optimum results use milk with 3.5% fat content and fill in 150 ml
l
Milk with 1.5% fat content and sony milk or lactose-ftrr milk does not froth as well.
Warm up the milk
l
Attach attachment “A”
l
Fill between 100ml and 350 ml cold milk into the jug.
Note:
Observe the filling mark.
l
Put the cover on. The slot in the lid must sit on the handle.
Switch on
Place the can onto the base.
Press the switch on button. The lamp in the switch lights up. The milk is whipped and heated up.
