Thanks to the buttons on B-link side, it is possible to play, pause and select previous
and next songs on the paired device. The volume control on B-link affects both jack and
Dock output.
1) Accept a call.
To accept a call press briefly the button (1).
2) End a call.
To end a call press briefly the button (1) during the call.
3) Reject an incoming call.
To reject an incoming call hold the button (1) for 2 seconds until you hear a long tone,
then release the button. The incoming call is rejected.
4) Activate voice dialing / voiceover / Siri.
If your phone supports voice dialing / voiceover / Siri you can activate it when no call
is in progress. To activate voice dialing /voiceover / Siri hold the button (1) for 2 secon-
ds until you hear a tone from the i7; When you hear the second tone you can pro-
nounce the command. Then hold the button (1) for 2 seconds to end the command.
5) Call the last selected number.
Press twice (double click) the button (1).
6) Transfer a call.
During the call, press twice the button (1) to transfer the call from your docking station
or headset to your mobile phone, repeat the above procedure to transfer the call from
mobile phone to your docking station or headset.
ATTENTION: If the paired device supports it, you can perform all the functions described in this chapter
while you are listening to the music.
MAKE AND RECEIVE A CALL
When B-link battery is discharged, indication LED (2) starts flashing red. It indicates that
in few minutes B-link will be turning off in order to protect the battery.
To charge the battery, directly connect B-link to a compatible docking station.
It is possible to charge B-link while in use.
As soon as the docking station is connected to a power source, the LED (2) turns on red
and it turns off once the charging is completed. When B-link is fully charged is possible
to unplug it from the Docking station.
Instead of using a docking station is possible to charge B-link through a charger or a
cable with Dock connector.
CHARGE B-LINK
13
