background image

2 General guidelines

6

Symbols on the device

Manufacturer of the product

Date of manufacture of the product

Product serial number from the manufacturer

Article number of the product

The user manual includes important safety information. Failure to comply with these
instructions can result in injury and material damage.

Please read this user manual carefully before commissioning the device.

This symbol indicates that the marked area becomes hot during operation. Contact with
it during or shortly after operation can pose the danger of burns.

In affixing the CE mark, the manufacturer declares that this product fulfils the basic
requirements of the EMC and low voltage directive.

The device may not be disposed as domestic waste. The vendor is responsible for
appropriate disposal of the device - it must be delivered to the vendor to be disposed of.
In affixing this symbol, the manufacturer furthermore declares that he has satisfied all the
legal requirements pertaining to the release, redemption and environmentally sound
disposal of electric and electronic appliances.
MELAG devices are synonymous for long-term quality. When you eventually need to
decommission your MELAG device, we offer a special disposal service. Simply contact
your stockist.

Summary of Contents for Sterilizer 255























Reviews: