background image

 

Operating manual MELAseal

®

100

 

Page 5 

3. Accessories 

3.1. Work  platform ______________________________________________________________

 

The sealing rail is 250 mm wide, so that it is possible 
to seal several narrow packages next to one another 
in one sealing operation. The work platform, which 
can be attached at the two mounting points (7) at the 
front of the MELA

seal

® 

Package Sealing Device, 

makes it easier to seal packages, especially if these 
contain heavy instruments. 

MELAG Art. No. 104 

 

3.2. Unit-mounted roll holder "Comfort" ____________________________________________

 

The "Comfort" unit-mounted roll-holder can be used 
to save space by mounting the rolls of sterilisation 
pack directly onto the MELA

seal

® 

Package Sealing 

Device. Bolts are supplied to attach it to the rear 
side of the Sealing Device. 

MELAG Art. No. 105

 

3.3. Wall-mounted roll holder _____________________________________________________

 

If the MELA

seal

®

 Package Sealing Device is placed 

against the wall, or if it is mounted directly on the 
wall, then it is best to have a wall-mounted roll 
holder positioned directly above it. The wall-mounted 

roll-holder can also be installed in a wall cupboard 
above the package sealing device, and the 
packaging foil fed through a slit in the base of the 
cupboard.  
Three different positions can be selected, depending 
on the width of the roll used, in order to ensure that 
the packaging foil is fed properly to the package 
sealing device.  

 

MELAG Art. No. 106 

3.4. Acrylic  hood  _______________________________________________________________ 

The acrylic hood fits over either the "Comfort" roll 
holder or the wall-mounted roll holder, to protect the 
packaging roll from dust, soiling, etc. 

MELAG Art. No. 107

 

3.5. "Standard" roll holder _______________________________________________________ 

The "Standard" roll holder can be used to hold the 
packaging role directly on the MELA

seal

®

  Package 

Sealing Device. This roll holder is fixed on the two 

mounting points on the rear side of the package 
sealer.  

MELAG Art. No. 109 

   

 

Wall

 

           

 

Summary of Contents for MELAseal 100 Economic








Reviews: