User Manual for the Cliniklav
25
26
Operation
Display message
6. Then press "Start-Stop"
to return to the
"Function" menu …
7. … and press "Start-
Stop" again to return to
the starting display.
5.4 Computer as output medium
__________________________________________
Logs and archives can also be kept by using a Computer. This requires a suitable connection between the
serial port of the Computer and the serial data and printer connection of the autoclave.
For data transfer and data processing then you can install the documentation software MELA
trace
/
MELA
view
on your Computer.
5.5 Employing other devices as output medium
_____________________________
For installation and operation of other output devices (e.g. MELA
flash
CF-Card-Printer, MELA
net
Box) you
find detailed information in the operating manual for the devices themselves.
In order to initialise the devices proceed as described in section 5.2.2, under step 6 select "MELAflash" or
"MELAnet" as output medium.
5.6 No output medium
__________________________________________________
In order to select the option "No output medium" proceed as described as in section 5.2.2. Under point 6,
however, use the "+" or "-" key to reach the setting "No output medium".
5.7 Output of the logs
__________________________________________________
5.7.1
Automatic immediate log output ___________________________________________________
When a log printer or another output medium is fully installed, a log output can be produced automatically at
the end of each program run by selecting the following options after switching on the autoclave:
Operation
Display message
1. Hold down "+" key and
also press "-" key.
Select "Function"
menu, submenu "Last
batch number".
2. Navigate with key '+' (
or ''-') to the submenu
"Batch output".
3. Press "Program" key,
select "Batch output"
menu ,submenu
"Output medium".
Program Start-Stop
F u n c ti o n :
B a t c h ou t p ut
Program Start-Stop
1 4 :2 7 :12
- 0. 02 b ar 25 °C
Program Start-Stop
F u n c ti o n :
L a s t ba tc h n um b er
Program Start-Stop
B a t c h ou t p ut
O u t p ut me di um
Program Start-Stop
F u n c ti o n :
B a t c h ou t p ut