28 |
③
Please use the correct typed battery to avoid the explosion.
④
Please dispose wasted battery according to the battery instruction.
⑤
Remove the battery after using it.
2.
Prepare the aircraft battery
Please use the fully charged 3S Li Po battery(recommended parameters
for battery
：
1143145 - 7000MAH - 20C
－
11.1V)
。
Battery charging environment temperature
0
～
45
℃
Battery discharging environment temperature
-20
～
60
℃
Battery store environment temperature
0
～
45
℃
Do not use the higher voltage battery to avoid damaging to the aircraft.
Please read it carefully and strictly observe the requirement of disclaim,
stickers on the battery surface. If not followed by the requirement to use, the
users shall assume all the consequences.
3.
Fitting the propeller
⑴
Prepare the aircraft and 10 -inch propeller first.
⑵
Assemble the propellers(the side with rotary mark facing up)to the aircraft.
Make sure that the rotary mark on the propeller is the same as the mark
on the frame arm. The arrow is direction stands for the rotating direction
of the motors.
⑶
Finally, fit the propeller nuts.
Note
：
①
Pay special attention to the propeller direction, make sure the motor is
rotating when propeller is down exhaust.
②
Motor and propeller are matching limit slots, make right location to install
correctly.
