Instructions for wireless charging
1. Connect the USB port of the product line to the 5V charging head, and the male type-C port to
the female type-C port of the wireless charging base. Then put the host into the wireless charging
base.
2. When the base is charging normally, the hidden LED indicator light inside the base shows green,
indicating that the charging base is working normally.
3. When the cleanser is fully charged, the hidden LED indicator light inside the base shows red
indicating that the charging base stops charging.
4. If the instrument has no power, and three lights will all become red
5. The charging time is about 2-3h,and the wireless charging pairing time is about 5 seconds.
When fully charged, the three white lights will on, and during the charging time instrument
cannot be used.
-Position of internal indicator light
-Internal indicator light
Guide wheel installation/replacement instructions
The guide can be disassembled and replaced(as shown below).Hold the main body with one hand
and pull the guide in the direction of the arrow with the other hand to disassemble the guide
wheel. When installing, align the guide buckle with the corresponding position at the end of the
body and gently press to complete the installation.
-Guide wheel (massage head)
-Body of cleansing machine
-Wireless charging base
In order to achieve better cleaning effect, it is recommended to replace the lead in 3-6 months.
Do not soak the instrument in water or wash it with high-pressure water.
Warranty period:12 months
Shenzhen meiyati intelligent Co.,Ltd.
