Meiwa MX110, Operation & Maintenance Manual

Page: 17 / 35

SECTION 5 - FUEL AND LUBRICATION SPECIFICATIONS
Contents Page
GENERAL INFORMATION __________________________________________________________________ 1
FLUID CAPACITIES ______________________________________________________________________ _ 1
GENERAL INFORMATION
Lubrication is an essential part of preventive maintenance, affecting to a great extent the useful life of the unit. Different
lubricants are needed and some components in the unit require more frequent lubrication than others.
Specific recommendations of brand and grade of lubricants are not made here due to regional availability, operating conditions,
and the continual development of improved products. Where questions arise, refer to the requirements and specifications in the
engine manufacturer's manual.
All oil levels are to be checked with the machine parked on a level surface, and while the oil is cold, unless otherwise specified.
TABLE 5-1 FLUID CAPACITIES
Fuel is flammable. May cause injury and property damage.
Shut down the engine, extinguish all open flames and do not smoke while filling the fuel tank.
Always wipe up any spilled fuel.
1. Stop the engine and open the fuel tank cap.
2. Use the automobile unleaded gasoline only.
3. Close the fuel cock before filling the fuel tank.
4. When filling the fuel tank, always use the fuel filter.
5. Wipe off any spilled fuel before starting the engine.
5-1
FUEL/OIL APPROXIMATE CAPACITY
MX-80 MX-90/110
ENGINE FUEL (Unleaded Gasoline) ______________________________ 2.5 litter 3.6 litter
VIBRATORY SHAFT CASE OIL(SAE 10W30) _______________________ 0.2 litter 0.2 litter
ENGINE OIL (SAE 10W30) ______________________________________ 0.6 litter 0.6 litter