SECTION 8 - 10 HOUR OR DAILY ROUTINE MAINTENANCE
Figure 8-1
No.
Parts No.
Detail
QTY
510
274-32602-10 AIR CLEANER AY 1
- 2
230-32620-08 PACKING
1
520
274-32603-07 ELEMENT SET
1
570
017-60600-20 SELF LOCK NUT 2
2. Remove the element assembly (520).
3. Separate foam element (520, left) from paper element (520,right). Check both elements for holes or tears and replace if
necessary.
4. To clean the foam element wash in a solution of household detergent and warm water, then rinse thoroughly or wash in a
nonflammable solvent. Allow drying thoroughly. Soak the element in clean engine oil and squeeze out excess oil. Too
much oil will cause engine to smoke on initial start-up.
5. To clean the paper element, tap lightly on a hard surface to remove dirt or blow out with compressed air from the inside out.
Do not use a brush to remove dirt. This can push dirt into the fibers. Replace the filter if it is excessively dirty.
6. Wipe out the inside of the cover with a damp cloth.
7. Reassemble the air cleaner.
FASTENING HARDWARE
Check all fastening hardware to ensure it is all adequately tightened and that none is missing or broken.
8-2
