MEITRACK TC68S/TC68SG User Guide
Copyright © 2019 Meitrack Group All rights reserved. - 6 -
Real-time tracking
Send a command to obtain the current device location.
Track by time interval
After you set the time interval, the device will report location information to the
platform or mobile phone at the preset time interval.
Track by distance
After you set the distance, the device will report location information to the platform
based on the preset distance.
Cornering report
Set the cornering angle. When the vehicle cornering angle is greater than the preset
value, the device will report location information.
3.3.2
Alerts
Function
Description
Disconnect alert
An alert will be generated and sent to the platform or user when the device is
removed from the OBD connector.
Speeding alert
Set the upper limit by platform. When the vehicle speed exceeds the preset value, an
alert will be generated.
Geo-fence alert
With a coordinate and radius, you can set a circular geo-fence.
Enter/Exit Geo-fence alerts will be reported to the platform or notified to the user by
SMS. At most 8 circular geo-fences are allowed.
SOS alert
An alert will be generated when the SOS button is pressed.
Low power alert for
the external power
supply
An alert will be generated when the voltage of the external power supply is lower
than 11.6 V.
Device status alert
An alert will be generated when the device is powered on or restarted.
3.3.3
Other Functions
Function
Description
Over-the-Air (OTA) update
Update device firmware by OTA.
GPS log
When the GPS is valid, the device will record the driving routes at the preset
time interval. You can use Meitrack Manager software to read these records
(at most 130,000 records).
GPS + LBS positioning
When the GPS is invalid, the GSM base station will be used for assisted
positioning, ensuring that the vehicle can be located at any time.
GPS blind spot report
When you enter or exit an area without GPS signal, the device will send a
report to the platform.
GSM blind spot storage/resend
When data fails to be sent to the platform in the GSM blind spot, the data
will be automatically stored. When the GSM becomes valid, the data will be
automatically sent. Built-in 8 MB flash memory can store 8,000 GPRS
records and 256 SMS records.
Mileage report
Each GPRS record contains the vehicle mileage. For the first use, you can
change the default mileage.
ACC ON report
Select the ACC ON report function. The device will send the ACC ON report
to the platform or mobile phone while ACC ON.
ACC OFF report
Select the ACC OFF report function. When the ACC is off for more than 150
