MEITRACK T633L User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 6 -
Idle Overtime detection: If the speed is less than 5km/h for 180 seconds, the alarm will be activated, parameters can
be modified by the B14 command or Meitrack Manager.
Fatigue Driving detection: If the vehicle has been driving for 240 minutes, the fatigue driving alarm will be activated,
parameters can be modified by the B15 command or Meitrack Manager.
Overspeed detection: Disabled by default, parameters can be modified by the B07 command or Meitrack Manager.
Harsh Braking, Harsh Acceleration and Harsh Cornering detection: the alert results vary according to the device
installation, vehicle model, vehicle weight, and driving behaviors. After the device has been installed properly, you
can use the BBD command,BC6 command and Meitrack Manager software to adjust the harsh acceleration and
braking alert values.
2.3.2
Emergency Alarm Detection
SOS Emergency Alarm: After the SOS button is pressed, the SOS alarm alarm will be triggered
Vehicle Impact Detection Emergency Alarm: The alert results vary according to the device installation, vehicle model
and vehicle weigh. After the device has been installed properly, you can use the CB4 command and Meitrack Manager
software to adjust the Impact Detection alert values.
Vehicle Rollover Detection Emergency Alarm: When the rollover Angle is greater than 45° and lasts for 10 seconds,
there will be a Rollover Alarm. The CC7 command can be used to calibrate the horizontal plane of the vehicle
2.3.3
Maximize I/O flexibility
T633L Offer outstanding configuration flexibility to cater to a wide variety of requirements and support at most 9
digital inputs, 8 outputs, 4 AD ports:.
Set to DIN high level trigger Set to DIN low level trigger
Set to AD
Set to output
Pin 3(white)
√
(IN1)
Pin 5(White&Brown)
√
(IN2)
√
(IN2)
√(AD3)
√(OUT5)
Pin 6(Yellow&Red)
√(IN6)
√(IN6)
√(OUT3)
Pin 7(White&Red)
√(IN3)
√(IN3)
√(AD6)
√(OUT6)
Pin 8(Blue)
√(IN4)
√(IN4)
√(AD1)
√(OUT7)
Pin 9(Blue&Brown)
√(IN5)
√(IN5)
√(AD2)
√(OUT8)
Pin 10(Yellow)
√(IN7)
√(IN7)
√(OUT1)
Pin 11(Yellow&Brown)
√(IN8)
√(IN8)
√(OUT2)
Pin 12(Green)
√(IN9)
√(OUT4)
2.3.4
Maximize Peripheral Interface
T633L supports 2 RS232 peripheral extension interfaces and 4 RS485 peripheral extension interfaces
RFID Reader
Ultrasonic Fuel Sensor
Camera
A82 LED Nixie Tube Display
