MEITRACK T399 Bluetooth Vehicle Tracker User Guide
Copyright © Meitrack Group 2021. All rights reserved. - 15 -
Note: If the MAC code of the Bluetooth beacon fails to be found, set it by Meitrack Manager app.
Set Bluetooth temperature and humidity sensor parameters.
Alarm when signal lost for(secs)
: If the Bluetooth temperature and humidity sensor fails to be detected within a
specified period, an alert is generated.
Trigger output when
: Output 1 or output 2 is controlled when Bluetooth signals are lost, the temperature is too high or
low, or the humidity is too high or low.
Control output
: Output 1 or output 2 is controlled.
Report Data
: Upload Bluetooth data or not.
MAC Address
: indicates the MAC code of the Bluetooth temperature and humidity sensor, as shown in the following
figures.
Press and hold down the button on the back of the Bluetooth temperature and humidity sensor for three seconds. Then
the blue LED indicator is on for five seconds, which means the Bluetooth temperature and humidity sensor is powered
on and starts to search information.