MeiTrack GT30i, User Manual, Page: 20 / 24

- 20 -
G=0 , all LEDs work normally;
G=1 , all LEDs stop flashing when the tracker is working.
H , reserved and defaulted as „0‟.
I=0 , turn off the function of sending SMS alarm when the extra power of the vehicle tracker is cut;
I=1 , turn on the function of sending an SMS alarm to the authorized phone number for SOS when the extra power of the
vehicle tracker is cut.
J , defaulted as 1.
### is the ending character.
(ABCDEFGHIJ defaulted as 1000100001)
Presetting by SMS for GPRS tracking ( Ensure that your SIM card supports GPRS connection prior to setting)
Set Tracker’s GPRS ID W******,010,ID W000000,010,00001
Remarks: to set a digital GPRS ID for the tracker.
GPRS ID must not be over 14 digits.
Set APN W******,011,APN,Username,
Password
W000000,011,CMNET,Meiligao,6688
W000000,011,CMNET
Remarks: If no APN username and password are required, just input APN only.
APN defaulted as „CMNET‟.
APN + us password should not over 39 characters.
Set IP and Port W******,012,IP,Port W000000,012, 220.121.7.89,8500
W000000,012,www.meiligao.net,8500
Remarks: IP is your server‟s IP or the domain name. Port: [1,65534]
Set DNS Server IP W******,009,DNS Server IP W000000,009,220.23.4.90
Remarks: If the domain name you set by the last command (W******,012,IP, Port) doesn‟t work, your server IP is not properly
set. You can first use this command to set DNS Server IP (please check with your DNS server provider for the DNS Server IP)
and then redo the command W******,012,IP,Port.
Enable GPRS Tracking W******,013,X W000000,013,1
Remarks:
X=0, to turn off GPRS tracking (default);
X=1, to enable GPRS tracking via TCP;
X=2, to enable GPRS tracking via UDP.
Set GPRS Interval W******,014,XXXXX W000000,014,00060
Remarks: to set time interval for sending GPRS packets.
XXXXX should be in five digits and in unit of 10 seconds.
XXXXX=00000, to turn off this function;
XXXXX=00001~65535, time interval for sending GPRS packet and in unit of 10 seconds.
In this example, the tracker will send every 600 seconds (10 minutes).
Set Heartbeat Interval W******,015,data W000000,015,10