Connecting & Operating the
MA-2
Please see next page with regards to installing the MA-2’s USB Audio drivers.
1. Connect the included power cable to the MA-2 power connector than to a free power
receptacle.
2. Connect the appropriate digital source connections up to the MA-2's digital inputs
using the appropriate high quality digital audio and USB cables.
3. Connect the appropriate analog outputs of the MA-2 to your pre-amp or integrated
amplifier.
4. Turn on the MA-2 using the main power switch and select the CD or a digital input by
pressing SOURCE selector button or using the remote.
5. Insert a CD into the slot drive to start playing Redbook CDs.
6. Once locked to a sample frequency the MA-2 will start its conversion process and you
will almost instantaneously be able to listen to music.
7. The MA-2 remembers the last digital input it was switched too prior to being switched
off.
015
Connecting & Operating the MA-2
meitner
© 2012 Meitner Audio, All Rights Reserved. Meitner Audio reserves the right to amend specifications & design without notice.
MA-2 Integrated Playback System