meitav-tec TAT-SUPER Owner'S Manual Download Page 2

- 2  -

Index

1. Owner’s Manual………………………………………………………………………………………….………… 3-5

1.1 Turning the unit On or Off ………………………………………………………………………………..……. 3

1.2 Adjusting the set-point temperature ……………………………………………………………………..…… 3

1.3 Selecting system mode …………………………………………………………………………………..……. 3

1.4 Selecting fan speed…………………………………………………………………………………………….. 3

1.5 Enabling or disabling “fan on demand” option …………………………………………………………..….. 4

1.6 Timer ………………………………………………………………………………………………………..…… 3

2. Installation………………………………………………………………………………………………………….. 5

3. Wiring connections …………………………………………………………………………………………….… 5

4. DIP switch configuration……………………………………………………………………………………..….. 6

5. Temperature sensors connection and logic (T1 & T2)…………………………………………………..….. 6

6. Technician settings ………………………………………………………………………………...……...…….. 7-8

6.1 Enter technician settings ……………………………………………………………………………….…….. 7

6.2 Set point temperature limit for heat …………………………………………………………………..……… 7

6.3 Set point temperature limit for cool……………………………………………………………………………. 7

6.4 Lock buttons …………………………………………………………………………………………..………… 7

6.5 Offset for calibration of ambient temperature ……………………………………………………………..… 7

6.6 Enable or disable the LCD backlight…………………………………………………………..……..……….. 7

6.7 Temperature scale …………………………………………………………………………………..…………. 7

6.8 Enable or disable Auto speed selection ……………………………………………………………..………. 7

6.9 Enable or disable input IN,0 ……………………………………………………………………….…………. 7

6.10 Input IN1,0 configuration – change over sensor or remote switch ………………………………………. 7

6.11 Input IN1,0 polarity ………………………………………………………………………………………..….. 8

6.12 Cool only configuration ………………………………………………………………………………………. 8

6.13 Compressor delay (for AC configuration) ………………………………………………………………….. 8

6.14 System configuration - AC (HC) / Fan-Coil…………………………………………………………………. 8

6.15 Internal or External sensor ……………………………………….………………………………….……… 8

6.16 Economy set point for cooling ………………………………….……………………………………….…… 8

6.17 Economy set point for heating ………………………………………………………………………...…….. 8

6.18 Backlight On / Backlight Off………………………………………………………………………………….. 8

6.19 Restore defaults ………………………………………………...…………………………………………….. 8

Summary of Contents for TAT-SUPER









Reviews: