www.meitavtec.com | [email protected] | M4000MD Digital HVAC Analyzer – Owner’s Manual | Pg. 16
At the end of one minute the unit will beep and the LCD screen will
display the results in kW.
CAPACITY
kW
To repeat this measurement, the return air and grill size are already in
memory, simply press [ENTER] and repeat sections 5.6.3 -5.6.5 above.
5.7.6.
When there are several outlet openings but the same return air,
press [ENTER] and repeat steps 5.6.3 - 5.6.5 for each one (make sure
you enter the correct width and length for each opening).
In Step 5.6.5 "WAIT" will flash for 20 seconds. Each time a measurement
ends the LCD will display the kW for that specific outlet. At the
completion of each test, the sum of ALL measurements can be displayed
by pressing the [
▲
] button.
Note: If you wish to go through the complete process of measuring capacity
again, which includes the return air measurement, you should wait 10
minutes to allow the humidity sensor to return to ambient conditions.
